Tile Fixing Adhesive

PRODUCT CODE : TFA

DESCRIPTION

• TFA is in powder form which consists of old portland cement, imported polymers and minerals.

ADVANTAGES:

• Excellent Adhesion to smooth surface such as existing tiles, mosaic surface etc.
• TFA also waterproofs the surface.
• Tiles need no soaking and can go directly from box to the wall minimizing breakages during soaking. This also saves labor.
• The surface to be tiled need not be made wet as TFA functions best on dry and clean surfaces. No curing is required as TFA is self curing type.

METHOD OF USE :

• Mix TFA and water in volumetric proportions of 3 volumes-TFA to 1 volume water. Mix it well to form a creamy paste.
• Allow 10 minutes to mature and apply this paste to the surface to be tiled and press the tile in firmly. Adhesion thickness of 3 mm is enough to create a good bond. Allow tiles to set for 24 hours before grouting.

COVERAGE :

• On smooth even surface TFA gives coverage of 2.5 square feet per kg approximately.

CAUTION :

• Keep away from children.

PACKING :

Available in 1 Kg, 5 Kgs, and 20 Kgs.

HEALTH & SAFETY PRECAUTIONS:

As with all chemical products caution should always be exercised.Protective clothing such as gloves and goggles should be worn. Treat any contact to the skin or eyes with fresh water immediately. Should any of the products be accidentally swallowed, do not induce vomiting but call for medical assistance immediately.

DISCLAIMER :

This information intended only for general guidance in the application of our products. Because of the large number of possible methods of application and processing, we are unable to accept responsibility in anyone particular case or application.

All product information's & application details given by Riya Chemy & its agents has been provided in good faith & meant to serve only as a general guideline during usage. Users are advised to carryout tests & take trials to ensure on the suitability of products meeting their requirement prior to full scale usage of our products. Since the correct identification of the problems, quality of other materials used and the on-site workmanship are factors beyond our control, there are no expressed or implied guarantee / warranty as to the results obtained.

Riya Chemy does not assume any liability or consequential damage for unsatisfactory results.